Author Topic: Motor Winding Supplies  (Read 5372 times)

Offline Ivan

  • Administrator
  • Senior Member
  • ****
  • Posts: 865
  • Country: us
    • Ivan's Garage
Motor Winding Supplies
« on: January 10, 2013, 04:40:26 AM »
I will be adding to this list or putting together a small package of insulation paper, sticks, varnish  ect... If anyone is really interested in winding there own motor.

It will take 12-15 lbs of magwire to wind a motor.

Here is a link for magwire, this was cheaper than buying from
my motor shop.

This is the link for 18 gauge mag wire.      :Ll>:
http://www.temcoindustrialpower.com/products/Magnet_Wire/MW0154.html
:co<:  If you bought just one or two extra can goods a week and donated to a food bank   Nobody would go hungry.

Offline Watts Up

  • Newbie
  • *
  • Posts: 14
Re: Motor Winding Supplies
« Reply #1 on: January 10, 2013, 06:32:27 PM »
This will be great. I would like to start soon, can you give an estimate for the package?
I will get the wire ordered up.

Offline Ivan

  • Administrator
  • Senior Member
  • ****
  • Posts: 865
  • Country: us
    • Ivan's Garage
Re: Motor Winding Supplies
« Reply #2 on: March 14, 2013, 04:12:30 PM »
Here is a new place I found for mag wire and even motors.

TEMCo - Tower Electric Motor Co.
Top Quality Transformers, Phase Converters,
Frequency Converters, Generators, & Motors

41484 Christy Street
Fremont, CA 94538 USA
Direct: 510-490-2187 x9019
Fax: 510-490-1507
Email: drew@getpower.us     
URL: http://www.temcoindustrialpower.com


This is the link for 18 gauge mag wire.
http://www.temcoindustrialpower.com/products/Magnet_Wire/MW0154.html
:co<:  If you bought just one or two extra can goods a week and donated to a food bank   Nobody would go hungry.