Author Topic: Adapter Plate and Hub for Sale (Motor to Tranny)  (Read 3425 times)

Offline mizlplix

  • Administrator
  • Senior Member
  • ****
  • Posts: 1445
  • Country: us
  • "The more you look, the more you find."
    • The old  build thread....
Adapter Plate and Hub for Sale (Motor to Tranny)
« on: December 11, 2012, 07:43:02 AM »
Contact Miz

Chevy adapter plate and hub for sale.  $500 + 50.00 S&H (Lowered to bottom price)

Hub Fits: warp8-9 and the HPEV AC series motors. 1-1/8" shaft with a standard 1/4" key.
Flywheel pattern is 1986 and newer.

Plate is the old standard Chevy V-8 (283-305-327-350-400) Bellhousing pattern.  Also fits
The GM BOP pattern too if you don't use the top two bolts. (Buick-Oldsmobile-Pontiac...Some Cadillac's too)

M small block V8 and 4.3L V6 1986 to present
19761992 Chevrolet Camaro
1980 Chevrolet Corvette (California only)
19771996 Chevrolet Caprice (includes Impala)
19771986 Pontiac Parisienne
19761979 Chevrolet Monza
19761979 Chevrolet Nova (also GM X-body clones after 1976)
19761988 Chevrolet Malibu, Chevrolet El Camino, and Chevrolet Monte Carlo
19781992 Pontiac Firebird
19781980 Oldsmobile Cutlass (US Market only, Canadian market 19781987)
19911992 Oldsmobile Custom Cruiser
19811987 Pontiac Grand Prix
19751979 Buick Skylark
19772003 Chevrolet/GMC Trucks, SUVs, Vans
19911992 Cadillac Brougham
19781987 Buick Regal

Made by Can EV, (sells for $825 + shipping, new)

The green plate and silver hub are included as are all bolts and small parts to do install.

The gold hub and shaft are not included, they go to the transmission.

Got any questions?   Email Miz at:: 

1930 Ford Speedster, AC50, full manual powerglide, 6.14gears, 38-130AH CALBs.