Author Topic: WELCOME to the Forum!  (Read 5845 times)

Offline mizlplix

  • Administrator
  • Senior Member
  • ****
  • Posts: 1443
  • Country: us
  • "The more you look, the more you find."
    • The old  build thread....
Re: WELCOME to the Forum!
« Reply #15 on: December 08, 2014, 07:50:18 AM »
Hello to the forums!

It is not complicated at all.

You need to unwind the old wires and pay attention to how they came off.  Keep written notes and put new ones back.

Notice the pattern and how many were in the bundle it was wound with. (They are not done with a single wire, they use several. )
AND the total length is important too.

It is the slot papers that will be the problem as the old ones are burned.

Miz

I do not know a source for them.
1930 Ford Speedster, AC50, full manual powerglide, 6.14gears, 38-130AH CALBs.